GIO is the perfect balance between quality, price and design.
With a full range of recreational vehicles as well as power equipment, tools, and parts, gio is the solution for everyone!
IMPORTANT : VEUILLEZ UTILISER LA CALCULATRICE D'EXPÉDITION POUR VOIR VOTRE BAS TAUX D'EXPÉDITION. LE PLUS BAS TAUX D'EXPÉDITION EST GARANTI !!
Si une offre est placée pendant les 15 dernières secondes d'une enchère, l'enchère sera automatiquement prolongée pendant des 15 secondes additionnelles dès la dernière offre. Cette enchère se fermera une fois que toute l'activité de offre s'est arrêtée pendant une période de 15 secondes.
Le produit est garanti pour être tout neuf et pas employé. Le produit est embarqué de Vancouver, AVANT JÉSUS CHRIST, le Canada au Canada seulement. Nous ne nous transportons pas à d'autres pays. Nous accepterons paypal, visa, carte principale, paiements de mandat. des honoraires d'enchère de 10% seront également chargés sur le gain offert si l'offre est au-dessus de 500CAD. Si l'offre est inférieure puis les honoraires 500CAD plats fixes standard de 49.95CAD sont chargés. Partie le & ; les accessoires sont des exceptions.
Quand vous placez une offre sur GIObikes.com, vous entamez un contrat légalement obligatoire. Si vous êtes le soumissionnaire de gain, vous devez payer les articles à la réception du gain offrez l'email. Le non-paiement pour 1 (un) offres de gain ou plus résultera en suspension et/ou arrêt de vos privilèges de offre. Nous te demandons de satisfaire l'offre seulement sur des articles que vous avez l'intention d'acheter.
Description
Shipping
Q&A
Revues
Stock Parts
Title:
Charrue pour VTT UTV
LOCATION:
Vancouver, BC, Canada
Vendu par:
GIOBikes
Couleur:
Status:
En Stock
More information >
Brand new snow plow for 300cc GIO Bear or 300cc GIO Ranger UTV. May work on 500cc Rock Liner (not confirmed). Winch is complete, hardware is included. May not include instruction manual.
Premier < Prec
Suivant > Dernier
Sort by:
Questions 1 - 9 of 9
par: Tuckfredgdawg 02/20/2012 01:46 PM
im just wondering if this plow will fit a suzuki vinson 500 thanks
A: Snow plow should work on Suzuki however we cannot give you 100% guarantee. You must have a winch to install it. par admin - Vancouver, British Columbia, 02/20/2012 09:48 PM
1 Réponse
0
0
0
par: DerBoo 02/17/2012 06:56 PM
Is there a cutting edge on the bottom of the snow plow
0 Réponses
0
0
0
par: bear100 11/09/2010 07:23 PM
how wide is the blade?
0 Réponses
0
0
0
par: dothedew 01/04/2010 12:50 PM
"Brand new snow plow for 300cc GIO Bear or 300cc GIO Ranger UTV. May work on 500cc Rock Liner (not confirmed). Winch is complete, hardware is included. May not include instruction manual"
Winch is complete? What does this mean? Does the kit come with one?
0 Réponses
0
0
0
par: dothedew 01/04/2010 12:44 PM
You mention in the overview that the plow bolts/fits to the 300cc bear ATV and the 300cc UTV that you sell. Does it do so with what came in the plow kit, or is there a mounting plate that is optional with the purchase of these atv/utv's? Also I would assume that it would bolt up to the bad boy utility atv's that you used to sell as well, or is there a plate that is optional for specific bikes? Thanks.
A: It DOES NOT bolt up to the BAD BOY !! You will spend time manufacturing a mounting plate. par higherpower_ca - Edmonton, Alberta, 01/10/2010 08:11 AM
A: Uhm, not to be a jerk, but I have a 250 "bad boy" and I used the supplied mount, no problem. Although I did put a couple of welds on it besides clamping it, just to keep things solid. par VinceDrake - Regina, Saskatchewan, 01/13/2010 06:35 PM
A: Thanks for the info. I've get to recieve mine from UPS yet, so I'm trying to research into it ahead of time. Can you post a review of the plow on the bad boy atv? Likes and dislikes? How well does it work, etc? par dothedew - sioux lookout, Ontario, 01/14/2010 08:23 AM
A: I'd like to, but I bought my plow kit and from the old "GiovanniBikes" site. All in all I'm really happy with the combination, overall. With some homemade chains for the rear, it will winrow 8" of snow no problem though. Nice curling action from the blade. Trying to push the same amount of snow straight ahead (No angle) doesn't work remarkably well, as you plain old run out of traction. You get 20-25feet in 8" of snow before you're done. But using it like a grader, it works excellent. We've been clearing our shop parking lot with the 250 and the plow kit for 2 years now, with no issues with either. The only caveat I would mention, if you're running with full lights, and the winch running the blade up and down a lot it *will* kill the battery over time. At low speed there's not a whole lot of charging available on a small motor, at 1500rpm in first gear. :D Mounting the plow kit to a 4x4 ATV would likely give you a little better steering, but I don't think you would push much more snow, at least without chains, or tracks. **One more thing, my machine is a ZMC, not a GIO. The only difference being my machine has a solid rear axle, but the GIO could be made solid with a little time, and a welder-- no problem. Hopefully this is somewhat helpful! par VinceDrake - Regina, Saskatchewan, 01/16/2010 05:29 PM
4 Réponses
0
0
2
par: dave69 12/30/2009 11:22 AM
I have a 700 yamaha grizzly will this plow fit? What do you get with the plow?
0 Réponses
0
0
0
par: njdfan30 12/13/2009 01:04 PM
Just to follow up on the ? of the blade fitting on the beast. Is it that it will not fit on the beast or is it that it is not recommended to use it with the beast. And if it does not fit, does anyone forsee a way to modify either the blade or the beast so it will fit on the beast?????
A: Hello, it won't work on mini beast. You need winch installed first, 200cc beast doesnt have winch. You could probably try to install but lots of work is needed. par admin - Vancouver, British Columbia, 12/13/2009 01:07 PM
A: Also on top of the fact that the atv is also very light to begin with, you would not likely be able to push and amount of snow without either spinning out or snapping chains. par dothedew - sioux lookout, Ontario, 01/04/2010 12:49 PM
A: To get more specific-- In order for the blade to angle side/side the blade needs to stick out a little over a foot in front of the ATV. Personally, I don't think the front shocks would carry the extra weight with the plow in the up position. par VinceDrake - Regina, Saskatchewan, 01/13/2010 06:32 PM
3 Réponses
0
0
0
par: Cameron88 10/29/2009 12:35 PM
Can this be made to fit a 200cc Beast?
A: This wont work on 200cc beast. You need a 300cc 4x4 Bear ATV, 300cc Ranger UTV, 250cc Bad Boy ATV, 500cc 4x4 Ridge Liner or similar utility quads. par admin - Vancouver, British Columbia, 10/30/2009 03:15 PM
A: Anything can be made to fit, however due to the shape of the frame on the beast atv, it would take some major modifiction to make it fit properly (ie cutting, welding, fabracting new brackets). Also, a winch would have to be utilized as well and be installed to operate the plow. par dothedew - sioux lookout, Ontario, 01/04/2010 12:48 PM
2 Réponses
0
0
0
par: leeman13 10/26/2009 06:18 PM
How wide is the blade, and is it able to angle?
A: I purchased one last winter, the blade is about 52" wide (I'll measure tomorrow) and Yes, it does angle, Left/Right, 5 locking postions, a good 35+ degrees at full lock. I'm really happy with it.
par VinceDrake - Regina, Saskatchewan, 10/28/2009 09:19 PM
